Freight Density Calculator · Free Class & PCF · FreightPlus

Enter your dimensions

Inches & Pounds

Length (in)

Width (in)

Height (in)

Weight (lbs)

1

Length (in)Width (in)Height (in)Weight (lbs)−

Add Pallet

Calculate Density →

Reset

Your Results

Total Weight

0lbs

Total Volume

0ft³

Density (PCF)

0

Estimated Class

Class —

Misclassified freight is one of the top causes of LTL overbilling. See if you are overpaying on Class.

Check My Freight →

Missing values

Please enter length, width, height, and weight for at least one pallet.

The Formula

Cubic Feet

L × W × H ÷ 1,728

Density (PCF)

Weight ÷ Cubic Feet

Density determines your freight class, which determines your LTL rate. Higher density = lower class = lower cost per pound.

Talk to an operator →

NMFC Freight Class by Density

Density-based classes for shipments without specific NMFC item numbers. For commodities with assigned NMFC numbers, the published class always takes precedence.

Density (PCF) Estimated Class Typical Commodities
Less than 1 400 Ping-pong balls, bouquets of flowers
1 to less than 2 300 Deer antlers, gold leaf
2 to less than 4 250 Bamboo furniture, mattresses
4 to less than 6 175 Clothing, couches, stuffed furniture
6 to less than 8 125 Small household appliances
8 to less than 10 100 Wine cases, caskets
10 to less than 12 92.5 Computers, monitors, refrigerators
12 to less than 15 85 Crated machinery, cast iron stoves
15 to less than 22.5 70 Car accessories, food items, books
22.5 to less than 30 65 Car parts, bottled beverages
30 or greater 60 Car parts, steel cables, bricks

Why Density Matters

Wrong density = wrong class = unexpected costs.

Freight density describes how much space your shipment occupies relative to its weight. Carriers use it to determine your NMFC freight class, which directly drives your LTL rate.

Misclassify a shipment and the carrier will reweigh and reclass it, often charging you more after the fact plus a reclassification fee. Get density right up front. See how the July 2025 NMFC density overhaul changed the rules.

Avoid Reclassification

Accurate density up front prevents costly reweighs and class corrections.

Lower Rates

Higher density typically means lower class, which means lower cost per pound.

Better Pricing

Quote with confidence when you know the true class before tendering.

Cleaner BOLs

Document accurate dimensions and class on every bill of lading.

FAQ

Freight class & density, answered

How to calculate freight density and PCF, how density sets your NMFC freight class, and how to lower it.

How do you calculate freight density?

Divide total weight (in pounds) by total volume (in cubic feet). Cubic feet equals length × width × height in inches, divided by 1,728. Example: a 48 × 40 × 48-inch pallet is 53.3 cubic feet, so at 500 lbs the density is about 9.4 PCF. The freight class calculator above runs this automatically for single or multiple pallets.

What is PCF (pounds per cubic foot)?

PCF, pounds per cubic foot, is your freight density. It is the single biggest driver of your LTL freight class: more weight in less space means higher density, a lower class, and a lower cost per pound.

How does density determine NMFC freight class?

Carriers map density to one of 18 NMFC freight classes, from 50 to 500, using the standard density scale shown in the table above. Denser freight lands in a lower class and earns a better rate. A shipment under 1 PCF is class 400, while one at 30 PCF or more is class 60.

Is the freight class from this calculator official?

It is an accurate density-based estimate. The actual NMFC class can differ because classification also accounts for stowability, handling, and liability, and some commodities carry a fixed class regardless of density. Use this to anticipate your class, then confirm the exact NMFC item with your carrier or 3PL.

Do all carriers use the same density-to-class scale?

Yes. The density scale is published by the NMFTA and is the industry standard, so density-based class is consistent across carriers. Differences show up only on commodities with specific NMFC item numbers, which always take precedence over the density estimate.

How do I lower my freight class and LTL cost?

Increase density and classify accurately. Tighter packaging, stacking, and palletizing reduce wasted cubic space and raise PCF, which lowers your class. Getting the class right up front also avoids reweigh and reclassification fees. A managed transportation partner audits both for you.

Ready for a real quote?

You've got the density. Now get a managed transportation partner that turns it into the right rate, the right class, and the right service.

Get a Quote → Schedule an Intro Meeting